Connectinga camcorder
You will need:
• standard A/V cables
- For better picture performance, if your camcorder has
S-video, connect an S-video cable (plus the audio cables)
to VIDEO I on the TV back instead of the VIDEO 2 on the
TV side panel.
VIDEO2 inputs on TVside panel
To view the camcorder video:
Select the VIDEO 2 video input source on the TV.*
* Toselect the video input source, press iNPUTon the remote control
(E:_>page 22). To program the TV remotecontrol to operate other
devices, see Chapter 3.
16