To create and assign a custom label:
1 Open the Channel Labelin0window.
2 Press f'_ or _ to select a channel you want to label.
3 Press ATe- to highlight CUStOmand press @.
The software keyboard will appear.
4
5
6
7
8
iiiiiiii
ClearA, iiiiiiii
iiiiiiii ANIMAL iiiiiiii Done
Repeatedly press the corresponding key on the remote
control to highlight the desired character on the on-screen
software keyboard.
The highlighted character is entered after you either press
a different key, press _ key, or after a two-second pause.
Repeat steps 4 and 5 until you have entered all desired
text.
When finished, press @.
New labels will be added to the list in alphabetical order
and marked with an icon t to indicate that they are
custom. Highlight the new custom label and press _ to
assign.
Assigned channel labels will be displayed in the banner,
ChannelAdd/Delete,ChannelsBlock,and Channel
Browser TM.
To delete the custom label:
1 Open the Channel Labelingwindow.
2 Highlight the label to be deleted and press (_).
3 Highlight Yes from the deletion confirmation window
and press @.
4
iiiiiiiii Done iiiiiiiiii
Highlight [?oneand press @ to save changes, and go
back to the Channel Labelingwindow.
Settingthe HDiVllTM audio mode
To set the HDMI audio mode:
1
2
3
Press ._u and open the Audio menu.
Highlight AudioSetup and press @.
Press A or Y to select HDNI1 Audio and then press
4 or _ to select the HDMI I audio mode (AUTO,Digital,
or Analog). (Auto is the recommended mode.) See
"Connecting an HDMI or DVI device to the HDMI
input" (_' page 17).
Langua ge .............................................................................
Optical Output Format Dolby Digital :
Do by U g a
Compressed
Dynamtc Range Control
Reset Done
Auto
When viewing the HDMI 1 input, if digital
audio from the HDMI input is available,
it will be output. If not, the TV will
automatically detect and output analog
audio from the PC Audio input.
When viewing the HDMI I input, digital
Digital audio from the HDMI input will be output.
When viewing the HDMI I input, analog
Analog audio from the PC Audio input will be
output.
4 To save your settings, highlight Done and press @.
Note: Because the PC and HDMI- 1 inputs share the same set
of analog audio inputs, the PC Audio menu setting influences
the HDMI 1 Audio menu setting. If PC Audio is set to "No,"
the HDMI 1 Audio setting changes to "Auto." If PC Audio is
set to "Yes," the HDMI I Audio setting is set to "Digital" and
is grayed out in the menu. (Also see item 3 on page 11 and
"Setting the PC Audio" on page 50.)
33
To Next Page
Loading...
