Usingthe Locks menu
The Locks menu includes the Enable Rating Blocking, Edit
Rating Limits, Channels Block, Input Lock, Control Panel
Lock, and New PIN Code features. You can use these features
after entering the correct PIN code.
Enteringthe PINcode
MENU
Press o and highlight the Locksmenu icon.
2
New PIN Code
Press V, which displays the PIN code entry screen.
• The LockSystem screen (below) appears if a PIN
code has not been stored. Press the Channel Number
buttons to enter a new four-digit code, enter the code a
second time to confirm, and press @.
• The L0cks/Active screen (below) appears if the PIN
code is already stored. Use the Number buttons to
enter your four-digit code and press @.
If the wrong PIN code is entered, the message "Incorrect PIN
code, please try again!" appears. Highlight Retry and press
@. Enter the code again and press @.
When the correct PIN code is entered, the Locksmenu opens.
If youcannotrememberyourPIHcode
RECALL
While the PIN code entering screen is displayed, press O
four times within five seconds. The PIN code will be cleared
and you can enter a new PIN code.
ChangingyourPIHcode
1 Press M_Uand highlight the Locksmenu icon.
2 Press V to display the PIN code entering screen.
3 Enter your four-digit PIN code and press @.
4 Press V to highlight New PIN C0de and press @.
5 Press the Number buttons to enter a new four-digit code.
Reenter the PIN code to confirm it.
6 Press @. The new PIN code is now active.
BlockingTV programsand movies
byrating(V-Chip)
Some TV programs and movies include signals that classify
the content of the program (violence, sex, dialog, language).
The V-Chip feature in this TV detects the signals and blocks
the programs according to the ratings you select. (For rating
descriptions, see the tables on the next page.)
To block and unblock TV programs and movies:
1 Press M_Uand highlight the Locksmenu icon.
2 Press V to display the PIN code entering screen.
3 Enter your four-digit PIN code and press @.
Press T to highlight EnableRatingBlocking.
5 Press _ and T to select On, and then press @.
Off iiiii
GameTimer Off
6 Press T to highlight EditRating Limits and press @. The
EditRating Limits screen (below) appears.
7 Press AV_I I_ and then press @ to select the level of
blocking you prefer. A box with an "×" is a rating that
will be blocked. As you highlight a rating, a definition for
the rating appears at the bottom of the screen.
8 When done selecting the ratings you want to block,
highlight Doneand press @.
Note: Above selection of blocking level is for U.S V-Chip system.
For Canada rating, you can highlight the "Canada RS" then press
@, another "Canadian Rating Menu" screen will appea_
46
To Next Page
Loading...
