Toshiba 42HL196 - TV Back Panel Connections

8
HL196 (E/F) Web 213:276
Chapter 1: Introduction
TV back panel connections
For an explanation of cable types and connections, see the Installation Guide.
4
2
1
3
TV back
Cable Clamper
Power cord
1 VIDEO 1 IN — Composite video and analog audio inputs
plus optional S-video inputs for connecting devices with
composite video or S-video output.
Note: Composite video and S-video cables carry only
video information; separate audio cables are required for
a complete connection.
2 ColorStream
®
HD-1 IN and ColorStream
®
HD-2 IN
— Two sets of ColorStream
®
high-definition component
video inputs (with analog stereo audio inputs) for
connecting devices with component video output, such as
a Toshiba DVD player with ColorStream
®
.
Note: Component video cables carry only video
information; separate audio cables are required for a
complete connection.
3 PC/HDMI-1 (AUDIO) IN — These analog audio inputs
are shared between PC IN (item 5 on next page) and
HDMI (DVI) IN (item 7 on next page). Their use can be
configured in the Setup menu (- page 51).
4 A/V OUT — Standard composite video and analog audio
outputs for connecting a VCR for editing and dubbing.
Note: The A/V OUT terminals will output AUDIO ONLY (no
video) in the following instances:
• When the TV's INPUT mode is HDMI, ColorStream, or
PC (- “Selecting the video input source to view,”
page 30).
• When the MP3 Audio Player is active (- page 65).
HL196_EN.book Page 8 Friday, June 2, 2006 2:35 PM