29
Using the TV’s features (General)
2. Press the key on the television’s remote control as
guided by the control panel shown.
Note: The available functions are dependent on the
connected equipment, not all the remote functions
may be available. Please refer to the operation manual
of the connected equipment.
REGZA-LINK Menus
By activating the Enable REGZA-LINK feature in the
REGZA-LINK setup menu, individual REGZA-LINK
features can then be activated.
One Touch Play
The function of REGZA-LINK will automatically power on
the television that was in standby mode and switch the
television’s input source to the port connected with the
audio/video equipment by powering-on or playing from
the audio/video equipment.
Note: This feature is dependent on the connected
equipment and television setting.
System Standby
This feature automatically switches the connected
equipment into standby when the television goes into
standby and conversely for the television to switch into
standby when connected equipment goes into standby. It
is selected in the REGZA-LINK setup menu.
Note: This feature is dependent on the connected
equipment and television setting.
System Audio Control
Using the Speaker Preference feature allows the
televisions remote control to adjust the volume or mute
the sound of the speakers connected to the television via
an AV amplifier.
Ensure that the connected AV amplifier and REGZA-
LINK equipment are selected in the input source
selection and that the Speaker Preference is set to
Amplifier in the REGZA-LINK setup menu.
Note: When the AV Amplifier is switched on, its input
source changed or the volume adjusted, the sound will
be output from the AV Amplifier’s speakers even if TV
Speakers has been selected. Turn the television off then
on again to output the sound from the TV’s speakers.
The full function may not work and is dependent on the
Amplifier being used.
PC Link
This feature automatically adjusts the suitable
widescreen formats and picture preferences when
connected to a REGZA-LINK PC.
Note: This feature is dependent on the connected
equipment.
Enable REGZA-LINK
When the Enable REGZA-LINK is set to On, it allows
the other functions to be enabled.
1. Highlight the REGZA-LINK Setup in the
PREFERENCES menu, and press ► or
to select.
Teletext
Subtitle
Audio Channel
Auto Format
4:3 Stretch
Side Panel
Game Mode
PREFERENCES
1
Off
Off
Stereo
Select Back Exit
EXIT
Enter
OK RETURN
REGZA-LINK Setup
2. Use ▲ or ▼ to select the Enable REGZA-LINK,
then press ◄ or ► to select On or Off.
Auto Power On
Auto Standby
Amplifier Control
Speaker Preference
REGZA-LINK Setup
TV Speakers
Off
Off
Off
On
Select Back Exit
EXITRETURN
Enable REGZA-LINK
Auto Power On
The Auto Power On setting allows the television to
be automatically switched On or Off if a REGZA-LINK
device is turned On or Off.
1. Highlight the REGZA-LINK Setup in the
PREFERENCES menu, and press ► or
to select.
2. Use ▲ or ▼ to select the Auto Power On, then
press ◄ or ► to select On or Off.
Auto Standby
When the Auto Standby is enabled, switching off the
television will automatically switch off all connected
REGZA-LINK equipment.
1. Highlight the REGZA-LINK Setup in the
PREFERENCES menu, and press ► or
to select.
2. Use ▲ or ▼ to select the Auto Standby, then press
◄ or ► to select On or Off.
To Next Page
Loading...
