English - 19 -
Highlight either Soundbar or Receiver
Select.
Note: Make sure your soundbar or receiver is connected to
your TV and switched on.
Select.
Select.
Standby
Standby
Standby
highlight Yes Select
No Select
Volume + and -
Yes
Select. If not select No and continue until
the volume level changes.
volume level.
Soundbar/Receiver Settings
will now see either Soundbar or Receiver in the
Equipment Control menu. This will show you all the
settings for your device.
Highlight Soundbar or Receiver Select.
You will now see a list of settings.
Select.
Volume Increments: Set the amount the volume
the volume. The default increment is set to 4.
Fast Forward or Rewind to increase or
Option to restore
Infrared Options:
IR Prole Timing and Repetition
Power Controls:
Power On Delay,
Power Command and Power Control
Fire TV Input:
Change Soundbar/Change Receiver: If you
Change Soundbar/
Change Receiver Select. To remove the
device highlight Change Soundbar/Change Receiver
Option
Advanced Settings
Fast Forward or Rewind to increase or de-
crease the increments.
Option
Live TV
Highlight Live TVSelect.
Tuning in your TV
instructions.
Highlight Channel ScanSelect.
Select
Cable/Terrestrial and Satellite
If the Cable/Terrestrial
Select the transmission method on the next screen and
Select to start search.
If the Satellite
Select
YesSelect to continue
Satellite Connection
If you select Complete Channel Scan or Manual
Channel Scan
Satellite
Connection LNB
TypeLNB PowerDiSEqC VersionSingle Cable
ToneBurst and Scan Mode
If you select Manual Channel Scan
To Next Page
Loading...
