English - 7 -
Turning On/Off the TV
Connect power
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket.
mains.
Note: The position of the power cord inlet may dier depending
on the model.
To switch on the TV from standby
Standby
To switch the TV into standby
Standby
on the Inputs
until the Power O
To switch o the TV
TV Control & Operation
Note: The position of the control button may dier depending
on the model.
Operating with the Control Button
To turn the TV o:
Inputs
the Power O
To turn on the TV:
will turn on.
To change volume:
consecutively to move the focus to Volume Up or
Volume Down
increase or decrease the volume.
To change channel (in Live TV mode):
focus to Channel Up or Channel Down
channel in the channel list.
To change input:
Inputs
Note: Live TV settings menu OSD in Live TV mode cannot be
displayed via the control button.
To Next Page
Loading...
