Toshiba 43L310U - DVI (same as HDMI but Requires an Audio Connection)

31
43L310U/ 49L310U/55L310U Toshiba 43"/49"/55" 1080p 60Hz LED TV
www.tv.toshiba.com
DVI (same as HDMI but requires an audio connection)
1 Make sure that your TV’s power cord is unplugged and the computer is turned off.
2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter
to the DVI OUT jack on the computer.
3 Connect the other end of the cable to the HDMI 1 (DVI) jack on the side of your TV.
4 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.
5 Press INPUT to open the Input Selection list.
6 Press
S or T to select HDMI 1, then press ENTER.
7 Adjust the display properties on the computer, if necessary.
Notes
• You must use the HDMI IN 1 (DVI) jack to connect a computer using
DVI.
• Your TV supports DVI video only. To add sound for a DVI connection,
connect external speakers or a sound bar to the computer.
HDMI cable
connector
HDMI IN 1
(DVI) jack
On your TV
HDMI cable with
HDMI-DVI adapter
Side of TV