English - 1 -
1
Building and tting stand
2
Inserting the batteries into the remote
The remote may have a screw that secures the battery compartment cover
onto the remote control (or this may be in a separate bag). Remove the screw,
if the cover is screwed on previously. Then remove the battery compartment
cover to reveal the battery compartment. Insert two 1.5V - size AAA batteries.
Make sure the (+) and (-) signs match (observing correct polarity). Do not mix
old and new batteries. Replace only with same or equivalent type. Place the
cover back on. Secure the cover again with the screw, if any.
In order to prevent injury and maintain stability
of this TV, secure it to a wall(or to another
immovable structure), as shown in the illustration,
using a sturdy strap and the P clips. Make sure
To Next Page
Loading...
