-
13
-
DESIGN MODE
1. ENTERING TO DESIGN MODE
ITEM
DATA
S D
Press
(Design mode) (Adjustment mode)
Press
3) Press MENU button on TV.
2) While pressing CALL button on Remote
and press MENU button on TV.
1) Select the Service mode.
2. SELECTING THE ADJUSTING ITEMS
Every pressing of CHANNEL button in the design mode changes the adjustment items in the order of table-3.
( button for reverse order)
Refer to table-3 for data of design mode.
(See SETTING & ADJUSTING DATA on page 26)
3. ADJUSTING THE DATA
Pressing of VOLUME or button will change the value of data.
To Next Page
Loading...
