47
Using the Remote Control
Installing batteries
Use carbon zinc batteries or alkaline batteries.
(Sample Illustration) installing the batteries
3 Slide on the cover.
Do not expose batteries to excessive heat such as sunshine, fire, etc.
❖ Every time you change the batteries, you must reprogram the
remote.
❖ Dispose of batteries in a designated disposal area.
❖ Always consider the environment when disposing of batteries.
Always follow applicable laws and regulations.
❖ If the remote does not operate correctly, or if the operating range
is reduced, replace the batteries.
❖ Always replace both batteries with new ones. Never mix battery
types or use new and used batteries together.
❖ Always remove batteries from the remote if they are dead or if the
remote control is not to be used for an extended period of time.
This prevents battery acid from leaking into the battery
compartment
To Next Page
Loading...
Need help?
General
Weight and Dimensions
