54
Initial Setup and Menu
Initial setup
While scanning is in progress, the Auto Tuning Progress Screen
appears.
(Sample Illustration) Auto Tuning Progress Screen
After scanning is complete, the auto tuning results screen (such as
the one below) will appear.
Press OK or EXIT.
(Sample Illustration) Auto Tuning Results screen
Although they may be displayed in the above list, encrypted
channels cannot be viewed.
If some channels are not found after scanning:
❖ Check the antenna/cable connections, and scan again.
❖ Connect the TV to the antenna or cable box directly and scan
again.
1 Press the MENU button. Select SETTINGS, SETUP,
Quick Setup, and then press OK.
A confirmation message appears.
2 Press the ( / arrow) buttons to select Yes. Press OK.
3 Repeat setup to Step 6.
❖ If you selected Antenna previously, select Cable.
❖ If you selected Cable previously, select Antenna.
Auto Tuning (Antenna)
Progress
0%
Channel: 5
Found
5
22
33
44
55
66
77
88
ATV
ATV
ATV
ATV
ATV
ATV
ATV
99
ATV
Auto Tuning (Antenna)
Antenna Channels Found: 12
Ch. Type RF Ch.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
