Need help?Do you have a question about the Toshiba 48L1433DG and is the answer not in the manual?
General| Screen Size | 48 inches |
|---|---|
| Resolution | 1920 x 1080 pixels |
| Display Type | LED |
| HDMI Ports | 3 |
| USB Ports | 2 |
| Smart TV | No |
| Backlight Technology | Direct LED |
| Refresh Rate | 50 Hz |
| Sound Output | 20 W |
Necessary precautions to be observed before servicing this chassis.
Procedure to measure touch current to prevent electric shock after repair.
Steps for updating firmware using a USB device for analog and digital signals.
Procedure for firmware update when the TV is powered on and accessible.
Activates hotel mode, allowing restricted user control over TV functions.
Sets the TV to open with its previous status (on or standby) upon power-up.
Sets the maximum allowable volume level, ranging from 0 to 63.
Controls whether a fixed volume value set in the menu is enforced.
Sets the specific fixed volume value when Fixed Volume Enable is active.
Allows headphone volume control via remote buttons when enabled.
Enables or prohibits the use of front panel buttons.
Disables specific or all On-Screen Display menus.
Specifies which setup menus become invisible in hotel mode.
Determines the starting channel or input source when the TV is switched on.
Enables or disables the use of teletext or MHEG services.
Copies service list and preferences from the TV to a USB device.
Copies NVRAM data from a USB device back to the TV.
Options for connecting the main board to the LED driver circuit.
Components related to the primary and secondary stages of the driver circuit.
Connection options for a microconverter within the LED driver system.
Options for sink MOSFETs used in the LED driver circuit.
Various channel configurations for the LED driver.
The connector interface for the LED driver circuit.
Circuitry for managing discharge in the LED driver system.
Optional configuration for discrete bridge components.
Options for capacitor configurations in the LED driver circuit.
To Next Page
