60
32" 720p / 55" 1080p 60Hz LED Google Cast™ TV
www.tv.toshiba.com
Selecting the audio output
Initial Speaker Setting lets you select whether your
TV’s remote control controls the TV speakers or a
connected audio receiver.
1 Press MENU, press
S or T to highlight Options,
then press OK.
2 Highlight HDMI CEC Control Setup, then press
OK.
3 Make sure that Enable HDMI CEC Control is set to
On.
4 Highlight Initial Speaker Setting, then press OK.
5 Highlight TV or Receiver, then press OK.
6 Press EXIT to close the menu.
Using the TV remote to control CEC-compatible
devices
When Enable HDMI CEC Control on the HDMI CEC
Control Setup menu is set to On, you can use the
remote control that came with your TV to control a
CEC-compatible device (such as a DVD or Blu-ray
player).
Button Press to...
(play/pause) Start or pause playback.
S T W X Play mode: Fast forward or fast
backward.
Menu mode: Navigate menu
options.
OK Play mode: Start or pause
playback.
Menu mode: Enter menu
options.
EXIT Return to the previous menu.
Note
These functions depend on the devices
connected.
To Next Page
Loading...
Need help?
General
