83
50" / 55" 2160p (4K), 60Hz, LED Chromecast built-in TV
www.tv.toshiba.com
Adjusting menu settings
You can adjust how the TV menus look by:
• Selecting the menu language
• Labeling a video input source
Selecting the menu language
You can choose from three different menu language
settings (English, Français, and Español) for the
on-screen display of menus and messages.
1 Press MENU, press
S
or
T
to highlight
Installation, then press OK.
2 Highlight Menu Language, then press OK.
3 Press
S
or
T
to select a language, then press OK.
4 Press EXIT to close the menu.
Labeling a video input source
You can add a label to a video input source to make it
easier to identify.
You can also hide a video input source so that it is
grayed on the Input Selection list and your TV skips the
video input source when you press INPUT.
1 Press MENU, press
S
or
T
to highlight Options,
then press OK.
2 Highlight Input Labeling, then press OK.
3 Highlight the video input source you want to
label, then press
W
or
X
to select a label from the
list.
4 Repeat steps 2 and 3 to label another input.
5 Press
S
or
T
to highlight Done, then press OK to
save the label.
6 Press EXIT to close the menu.
Note
If you are not using an input, you can select
Hide for the label. Hide grays the input in the
Input Selection list and skips the input when
you press INPUT on the remote control.
Notes
To reset the input labels to the default
labels, highlight Reset, then press OK.
To Next Page
Loading...
