Toshiba 57H83 - Continued Safety Instructions and Care; Appliance Operation and Care Precautions; Service and Maintenance Safety

– 4 –
GENERAL ADJUSTMENTS
SPECIFIC INFORMATIONS
4 Screws
S.V.M. Coil
CRT DRIVE Board
Lens Assembly
CRT Assembly
Deflection Yoke and Conver Yoke
CRT Mounting
4 Screws
CRT ASSEMBLY REPLACEMENT AND MOUNTING
CAUTION : DO NOT LOOSEN THE HEX HEAD BOLTS WITH SPRINGS (12 PCS), BECAUSE THOSE ARE FOR
SEALING OF CRT COOLANT.
Lens and Neck Components View
Attention Serviceman
The Hex Head
Bolts with
Springs. (see
sketch) used on
CRT assembly,
are NOT
Adjustment Screws
DO NOT LOOSEN-FLUID
LEAKAGE WILL OCCUR.
R
GB