Using the AUTO ASPECT feature (480i signals only)
When the AUTO ASPECT feature is set to ON and the TV receives a
480i signal, the picture size is automatically selected (as described in
the following table).
4:3
16:9
Not defined (no ID-1 data)
Theater Wide 2
Full
User-selected picture size {pgs. 30-31)
If"t}_esignal does not include aspoct information, tile picture size you
selected on pages 30-31 is displayed.
To turn on the AUTO ASPECT feature:
1. Press MENU, and then press • or • until the THEATER menu
appears.
2. Press • or • to highlight AUTO ASPECT, and then press • or
• to select ON.
@@#@@@
Note:
TheAUTO ASPECTfeatureJsnot avadab/e
when wewingantenna(cable) or DVI input
sources
@ ® ®
®® ®
®® ®
WOW
SRS 3D ON
FOCUS ON
T_uBass OFF
i _WWWWWI
...... ..... o
i
NOTICE OF POSSIBLEADVERSE
EFFECTSONTV PICTURETUBE
Avoid displayingstationary images on
your TVscreen for extendedperiods of
time. Fixed(non-moving) Jntages(such
as still PlP/P0P windows or blacWgray
bars in wide-screen picture or PIP/POP
formats) can become permanently
engrained in the picture tube.111istYpe
of damage is NOT COVERED BY
YOUR WARRANTY because it isthe
result of misuse.See item 33on page4.
==============================
33
To Next Page
Loading...
