Toshiba 57H83 - Unlocking Specific Channels; Locking Video Input Sources

Tounlockindividualchannels:
1.FromtheLOCKSmenu,selectCHLOCK.
2.Press• or• todisplaytheCHLOCK menu.
3. Press A•• • to highlight the channel you want to unlock, then
press ENTER.
_ LOCKS
V_HI P
ENABLEBLOCK ING ON
TV RATING
MpAA RATING
GAME T_MER 33 0 _
FRONT PANEL LOC_( 0 0 0 _
N_ P I N CODE TV CABt EI_
_LOCKS
I_ V_H_PENABLEBLOCK _NG ON
iV RATING
MPAA RATING
V_DEO LOCK 12 _8 33 ii
FRONT PANEL LC*OK
NEW piN CODE TV ¢:A_I {
4. Repeat step 3 for other channels.
To unlock all locked channels at once:
Press • or • to highlight CLEAR ALL, and then press • or •.
_ LOCKS
_,_.,_ iiENABLEBLOCK ING ON
TV RATING
MpAA RATING P
'"P°o_ *_ o i
V_DEO LOCK
GAME T_MER
Locking video inputs
With the VIDE() LOCK feature, you can lock out the input sources
(Video 1, Video 2, Video 3, ColorStream HD1, ColorStream HD2,
DVI/HDCP) and channels 3 and 4.
You will not be able to select the input sources with the TV/VIDEO
button or Channel buttons unless you clear the setting.
To set up the video lock:
1. From the LOCKS menu, select VIDEO LOCK.
2. Press • or • to highlight the level of video locking you want
(Video, Video+, or Off), as follows:
VIDEO : Locks Video 1, Video 2, Video 3, ColorStream HD1,
HD2, and DV1/HDCP.
VIDEO+ : Locks Video 1, Video 2, Video 3, ColorStream,
HD1/HD2, DV1/HDCP, and channels 3 and 4. This
option should be used if you use the antenna terminal
to play a video tape.
OFF
Note: Make sure the POPis not on channe/3 or 4
: Unlocks all video input sources.
@ ® ®
® ® ®
® ®®
_VCR
®..... ::
v CHIP
ENABLE BLOCK I NG ON
TV RAT1 NG
MpAA RATING
BLOCK I NG OPT1 ON t,
FRONT PANEL LOCK OFF
NEW p IN COOE
42