67
Getting Started
Using external display devices
❖ Built-in display and TV (extended desktop)
To use a simultaneous mode, you must set the resolution of the
internal display panel to match the resolution of the external
display device.
Selecting this Card or pressing the hot key displays the
following options:
(Sample Image) Display options window
3 Release the
Fn key.
TECHNICAL NOTE: You can also change these settings using the
Display Properties box.
Set the option for the video controller by clicking Start,
Control Panel, Appearance and Themes, and then Display. Choose
the Settings tab, click the Advanced button, select Display Device,
select the applicable Monitor type, and then click Apply or OK.
Adjusting the quality of the external display
To obtain the best picture quality from your television (or other
video display device), you may need to adjust the video settings.
See the video device documentation for additional configuration
steps.
TECHNICAL NOTE: To use one of the simultaneous modes, you must
set the resolution of the internal display panel to match the
resolution of the external display device. The external display device
must support a resolution of 800 x 600 or higher.
To Next Page
Loading...
Need help?
General