Toshiba CARRIER RAV-SP180AT2-UL - 7 Circuit Configuration and Control Specifications; Print Circuit Board <MCC-1571

– 30 –
F01, 02, 25A fuse Lead wire for grounding
(Black)
DB01:
DB01:
Single-phase rectifier diode
Single-phase rectifier diode
Comp. lead (Red) (White) (Black)
DB02: High power factor diode Q404: High power factor circuit IGBT
F03: 3.15A fuse
F03: 3.15A fuse
C12, 13, 14
C12, 13, 14
electrolytic capacitor
electrolytic capacitor
CN500: Case thermo. or High pressure SW
Fan drive circuit Q300 to Q305: FET (QTY: 6P)
12V
12V
12V
5V
5V
5V
GND
GND
GND
IC800: MCU
IC800: MCU
CN700: PMV connector
CN605: Sub SW board connector
Comp. drive circuit Q200 to Q205: IGBT (QTY: 6P) IC200: Drive IC (QTY: 1P)
L-phase power supply lead (Black) N-phase power supply lead (White) Serial lead (Orange) Reactor lead connector (White) CN300: Fan motor connector CN602: Outdoor temperature (TO) sensor connector CN806: Optional connector CN600: Heat exchange temperature (TE) sensor connector CN603: Suction temperature (TS) sensor connector CN601: Discharge temperature (TD) sensor connector CN701: 4-way valve connector RY701: 4-way valve relay
IC800: MCU
DB01: Single-phase rectifier diode
F03: 3.15A fuse
C12, 13, 14 electrolytic capacitor
7. CIRCUIT CONFIGURATION AND CONTROL SPECIFICATIONS
7-1. Print Circuit Board
<MCC-5009>
RAV-SP180AT2-UL