Toshiba CF19F30 User Manual

Selecting Stereo or Monaural Sounds
>
The MTS (Multi-channel TV Sound) feature allows you to improve your TV viewing with high fidelity stereo sound.
This TV also allows you to activate or deactivate the stereo sound effect.
To listen to stereo sound
MENU TVVIDEO Y¥VOLUMEA YCHANNELA POWER 1
~/+
ADV
MENU
2
TOSHIBA
12
When the TV receives a stereo broadcast,
the word “STEREO” is displayed on the
screen whenever the TV is turned on, a
channel is selected, or the RECALL button
is pressed.
Press MENU repeatedly until the Audio
menu is displayed on the screen.
Press ADV repeatedly until “MTS” ts
displayed in magenta.
If a stereo broadcast is received, “STR”
will be displayed in yellow.
Press <4/- or ®/+ until “STR” (stereo) is
displayed in magenta.
Normally this function can be left in the
STR mode. Your TV will then automati-
cally reproduce either stereo or
monaural sound, whichever is broadcast.
If the stereo sound is noisy
Be sure you have selected the STR mode if
broadcast is in stereo. However, if a
broadcast signal is not strong enough, and
noise-free stereo sound is not available,
select “MONO” (monaural) mode.
The noise should be reduced.
STEREO
TO SELECT {TEM PUSH ADV
TO CONTROL PUSH - +
TO SELECT i TEM PUSH ADV
TO CONTROL PUSH - +
TO SELECT ITEM PUSH ADV
TO CONTROL PUSH - +

Toshiba CF19F30 Specifications

General

Brand	Toshiba
Model	CF19F30
Category	TV
Language	English