Toshiba CF19F30 User Manual

ADD/ERASE function
MENU =TV/VIDEQ ¥VOLUME& YCHANNELA POWER
After performing the CH PROGRAM function, you can add or erase
specific channels.
ADV
1 Select the channel you want to erase using the CHANNEL A or V
button, or select the channel you want to add using the Channel
ye ed Number buttons.
ADV 2 Press MENU repeatedly until the Setup
MENU
menu
is
displayed
on
the
screen.
3 Press ADV repeatedly until “ADD/ERASE” pane an ae
is displayed in magenta. cH LARK
TO SELECT ITEM PUSH ADV
TO CONTROL PUSH - +
4 Press <4/- or P/+:
To erase the channel
Press the button until “ERASE” is dis-
Channel played in magenta indicating that the ; debe .
Number channel has been erased from the CH LOCK E
memory. Ss
TO SELECT | TEM PUSH ADV pia
ADV
A
TO
CONTROL
PUSH
-
+
®
CHANNEL
g
A/¥ To add the channel a
a P/+ Press the button until “ADD” is displayed £
ADV ¥ MENU in magenta indicating that the channel z
has been memorized. G
TOSHIBA
x
°
a.
TO SELECT !TEM PUSH ADV
TO CONTROL PUSH - +
5 Repeat steps 1 to 4 for other channels.
You have now completed the channel programming.
CABLE channel reference chart
Correspond-
ing CABLE A-8 5{A-7) 6(A-6) A B GS, apsarpeereseeseer) V W AA BB ore KX YY ZZ AAA BBB 65 _~ 66
channel
Correspond-
ing CABLE 68 GO steers 2 93 94 A-5 A-4 A-3 A-2 A-1 100 101 102s" 123° 124 125
channel
The above chart is typical of many cable system channel allocations. If in doubt, consult your cable company.

Toshiba CF19F30 Specifications

General

Brand	Toshiba
Model	CF19F30
Category	TV
Language	English