Programming Channel Memory (Continued)
• _-- ADV .... 4-
MENU CHANNEL
A/T
Channel
Number -
ADV •
ADV •
--+
After performing the CH PROGRAM function, you can add or erasE:
specific channels.
2
3
4
Select the channel you want to erase using the CHANNEL _b,or •
button, or select the channel you want to add using the Channel
Number buttons.
Press MENU repeatedly until the Setup
menu is displayed on the screen.
Press ADV repeatedly until "ADD/ERASE"
is displayed in magenta.
_O0 f ERASE : [AODIERASE
"0 SELECT ITEM PJSH AEV
"0 CONTROL PUSH - ÷
Press- or + :
To erase the channel
Press the button until "ERASE" is dis-
played in magenta indicating that the
channel has been erased from the
memory.
,; : : : " :', [ERASE]
TO SELECT II'EM =USH ADV
TO CONTROL PUSH - +
To add the channel
Press the button until "ADD" is displayed
in magenta indicating that the channel
has been memorized.
] :.
]
TO SELECT ITEM PUSN ADV
TO CONTROL PUSH - +
5 Repeat steps 1 to 4 for other channels.
You have now completed the channel programming.
CABLE channel reference chart
Number on
thisrV
Correspond-
ing CABLE
channeP
• Number on
this TV
Correspond-
ing CABLE
channel
1 5 6 14 15 16 ..................34 35 36 37 38 ..................60 61 62 63 64 65 66
A-8 5(A-7! 6(A-6) A B C ..................U V W AA BB ..................XX YY ZZ AAA BBB 65 66
ro_'- _4 69...£.L......:._92
93 94
95 96 97 98 99 100 101 102i_r!_'",:'123t 424 _5":::;::
67 _68. 69 ..................92 93 94 A-5 A-4 A-3 A-2 A-1 100 101 102 ..................123 124 125
The above chart is typical of many cable system channel allocations. If in doubt, cc)nsult your cable company.
16
To Next Page
Loading...
