Toshiba D-R265SE - Cabinet Disassembly Instructions

1-5-1 E7B71DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
2. Disassembly Method
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to “Reference Notes.”
Reference Notes
1. CAUTION 1: Locking Tabs (L-1) and (L-2) are
fragile. Be careful not to break them.
NOTE: BOARD MEANS PRINTED CIRCUIT BOARD.
ID/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Desolder
Note
[1] COVER TOP D1 8(S-1) ---
[2]
PANEL
FRONT
D2 *6(L-1), *3(L-2) 1
[3]
DVD
MECHANISM
& DVD MAIN
BOARD
ASSEMBLY
D3
4(S-2), *CN101,
*CN701, LOCKING
CARD SPACERS
---
[4]
BOARD
SWITCH
D4 (S-3), Desolder ---
[5]
BOARD
HOLDER
D4 2(S-4) ---
[6]
BOARD
POWER
SUPPLY
D4 2(S-5), *CN1152 ---
[7]
POWER
HOLDER
D4 (S-6) ---
[8] FAN COVER D5 2(S-7) ---
[9] FAN D5
FAN EARTH,
*CN1601
---
[1] COVER TOP
[2] PANEL FRONT
[9] FAN
[8] FAN COVER
[3] DVD MECHANISM & DVD MAIN BOARD ASSEMBLY
[4] BOARD SWITCH
[5] BOARD HOLDER
[6] BOARD POWER SUPPLY
[7] POWER HOLDER
[10] PANEL REAR
[11] BOARD POWER
[12] BOARD JACK [13] BOARD AFV
[10] PANEL REAR D5
(S-8), 6(S-9),
2(S-10)
---
[11]
BOARD
POWER
D6 3(S-11) ---
[12] BOARD JACK D6 Desolder ---
[13] BOARD AFV D6 Desolder ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
ID/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Desolder
Note
[1] COVER TOP
(S-1)
(S-1)
(S-1)
Fig. D1