33
Playback
Recording
Editing
Others
Introduction
Function setup
Setting for recording on a DVD-R/RW disc in Video mode
This setting is necessary to play the contents on a DVD-R/RW disc with other DVD players.
Items to set up
When recording in Video mode, there are some
restrictions by DVD-Video standard.
Therefore, it is necessary to set up these items below.
Set up the items in advance before recording onto a
DVD-R/RW disc.
DVD compatible mode
Only the main sound and SAP sound are available
for recording in Video mode under DVD-R standard.
Off: This is not for recording on a DVD-R disc.
Depending on Picture/Audio settings, making
DVD Video may not be possible. (When
recording directly on a DVD-R/RW disc of
DVD-Video mode, the recording proceeds
with “Main” on even though “Off” is set.)
Main: In multichannel broadcasting, only the main
sound is recorded.
SAP: In multichannel broadcasting, only SAP
sound is recorded.
Aspect ratio
“4:3” and “16:9” cannot be mixed in one title.
Therefore, set the aspect ratio before recording.
4:3: Set the aspect ratio to 4:3
16:9: Set the aspect ratio to 16:9
Chapter dividing (“DVD-Video: CHP create”)
This is the setting to divide a title into some
chapters. It is convenient to skip scenes.
Off: Chapter dividing is not available.
5 min, 10 min, 15 min, 20 min:
Select an interval for chapter dividing.
Note
• When the number of chapters reaches a limit, chapters are
not divided anymore. The limit number of chapters is
dependent on conditions of a DVD-R/RW disc.
1
Press SETUP.
SETUP menu appears.
2
Select “DVD recorder operation”
and press SELECT/ENTER.
3
Select “Aspect ratio (Video
mode)” and press SELECT/
ENTER.
4
Select an item and press
SELECT/ENTER.
Set “DVD compatible mode” and “DVD-Video:
CHP create” as step 3, 4.
How to set up
e.g.
e.g.
e.g.
SETUP
SELECT/
ENTER
SELECT/
ENTER
SELECT/
ENTER
To Next Page
Loading...
