Toshiba D-RW2SU/D-RW2SC - Reformatting a Disc; Setting for Auto Chapter

54
Recording
EN
Reformatting a disc
Selecting the Recording format (cont’d)
Setting for Auto Chapter
If you are using a DVD-RW disc, you can reformat the
disc.
1) Press [SETUP].
2) Using [K / L], select “Disc”. Press [ENTER].
Disc menu will appear.
3) Using [K / L], select “Format”. Press [ENTER].
Format menu will appear.
4) Using [K / L], select “Start”. Press [ENTER].
Confirmation window will appear.
5) Using [K / L], select “Yes”. Press [ENTER].
Formatting will start.
6) Formatting is complete.
“100%” will be indicated.
Notes
• When you reformat the disc, the contents of the disc will
be erased.
• If you want to cancel format at step 5, select “No” with
[K / L].
Format
Format Mode Video mode
Start
Format
Format mode Video mode
Start
Are you sure?
Yes
No
You can set a specified time for chapter marks.
“10 minutes” has been selected as the default.
1) Press [SETUP].
2) Using [K / L], select “Recording”. Press
[ENTER].
3) Using [K / L], select “Auto Chapter”. Press
[ENTER].
Option window will appear.
4) Using [K / L], select a desired time. Press
[ENTER].
5) Press [SETUP] to exit.
Notes
• The interval for chapter marks may slightly deviate from
the one you specified on the Auto chapter screen.
• A blank chapter may be created depending on the
remaining time of the disc.
Recording
Recording Audio Select (XP)
Auto Finalize
Auto Chapter
Dolby Digital
10 minutes
Auto Chapter
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
OFF
This operation may take a while
to be completed.
RecordingCD.indd54RecordingCD.indd54 2006/02/1620:58:082006/02/1620:58:08