R
Ronald NewmanJul 26, 2025
How to change display language on Toshiba D-VR4?
- LlukecarpenterJul 26, 2025
To change the display language on your Toshiba DVD VCR Combo, select the appropriate language in the SETUP MENU.
To Next PageTo Next PageHow to change display language on Toshiba D-VR4?
To change the display language on your Toshiba DVD VCR Combo, select the appropriate language in the SETUP MENU.
What to do if my Toshiba DVD VCR Combo has no picture?
If your Toshiba DVD VCR Combo shows no picture, make sure the antenna connection is correct and the antenna cable is properly connected. Also, verify that the video channel is correctly set and your TV is set to video channel 3 or 4. Ensure the unit is connected correctly and the video input selector on your TV is set to VIDEO (or equivalent). Check that the channel is not set to the external mode.
Why my Toshiba DVD VCR Combo does not operate?
If your Toshiba DVD VCR Combo is not operating, ensure the power cord is properly plugged in and try using a different AC outlet. Check your fuse or circuit breaker to make sure power is on. You can also try unplugging the unit and then plugging it back in. Ensure that you have selected either the DVD or VCR mode before attempting to use it.
Why is there no sound from my Toshiba D-VR4?
If you're not getting any sound from your Toshiba DVD VCR Combo, first verify that the unit is connected correctly. Then, check that the input selector on your amplifier is set properly. Also, confirm that the unit is not in a special playback mode.
What to do if recording does not work on Toshiba D-VR4 DVD VCR Combo?
If recording isn't working on your Toshiba DVD VCR Combo, check the disc space using the disc information. Ensure the disc isn't protected and that the video you're trying to record isn't copy-guarded. Also, verify that the number of recorded titles is 99 or less and the total chapters for the recorded titles is 999 or less, using the disc information. If you're using a DVD-RW of Ver.1.0, recording in Video mode may not work, so check the disc type.
What to do if playback doesn’t start on Toshiba D-VR4 DVD VCR Combo?
If playback doesn't start on your Toshiba DVD VCR Combo, confirm that a disc is inserted. If a disc is inserted, it may be dirty, so clean it. Also, note that the unit cannot play DVD-ROMs, etc.
Why a disc recorded using Toshiba DVD VCR Combo cannot be played back in other players?
If a disc recorded with your Toshiba DVD VCR Combo cannot be played back in other players, first check that the disc is finalized. Note that some DVD players will not play the disc even if it has been finalized. Also, if the disc was recorded in VR mode, the other player must be RW compatible to play it.
General| Brand | Toshiba |
|---|---|
| Model | D-VR4 |
| Category | DVD VCR Combo |
| Language | English |
