Toshiba D-VR7KC2 - Adjusting Black Level

69EN
Disc
Management
Recording
Playback
Introduction Connections Basic Setup Editing Function Setup VCR Function Others
You can adjust the black level to control the brightness
of the picture in order to get a better picture.
1) During playback, press [DISPLAY].
2) Use [{ / B] to select
to display the selection
menu.
e.g.) DVD-video
1/ 5 1/ 5
DVD
0:01:00 / 1:23:45
Video
3) Use [K / L] to select “Black Level”, then press
[ENTER].
1/ 5 1/ 5
DVD
0:01:00 / 1:23:45
Noise Reduction OFF
Black Level OFF
Video
4) Use [K / L] to select “OFF” or “ON”, then press
[ENTER].
Your setting will be activated.
1/ 5 1/ 5
DVD
0:01:00 / 1:23:45
OFF
Video
ON
OFF : Shows the original picture as recorded.
ON : Make the darker parts of the picture more
visible.
Note
• You can adjust black level setting only during
playback.
• The setting will be kept even when the unit is turned
off.
• The default setting is “ON”.
Adjusting Black Level
SELECTING THE FORMAT OF AUDIO AND VIDEO
E9PG0CDDVR7KC2ENv1.indd69  72009/07/2314:39:37