Toshiba DP125F - Multi-Address Transmission Report Setting

199
Press:
+
+
+
+
+
+
SET MULTI-ADD REPORT
1.ALWAYS
2.ON ERROR
3.OFF
Multi-Address Transmission Report Setting
Display the
MULTI-ADD
REPORT Menu
1
Select the desired option for
Multi-address Transmission Re-
ports.
To ALWAYS print a Transmis-
sion Report whenever a docu-
ment is transmitted, press:
To only print a Transmission Re-
port when an error has occurred,
press:
To turn off automatic printing of
Transmission Reports, press:
To print a first page image of
the document on the transmis-
sion report, press:
To not print a first page image
of the document on the trans-
mission report, press:
The following screen is dis-
played to confirm your selection.
Select the Option for
Multi-Address TX
2
PRINT 1ST PG IMAGE?
1.ON
2.OFF
OPERATION COMPLETED
After completing the Mult-Ad-
dress Transmission Report Set-
ting, you may continue to select
other Report settings referring to
their associated pages for in-
struction, or press
to exit the Report Setting mode
and return to the Standby Mode.
Set the Option for
First Page Image
3