Need help?Do you have a question about the Toshiba e-STUDIO 163 and is the answer not in the manual?
General| Print Technology | Laser |
|---|---|
| Print Speed | 16 ppm |
| Max Print Resolution | 600 x 600 dpi |
| Copy Speed | 16 cpm |
| Max Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Functions | Print, Copy, Scan |
| Warm-up Time | 25 seconds |
| Paper Output Capacity | 100 sheets |
| Duplex Printing | Manual |
| Interface | USB 2.0 |
| Memory | 32 MB |
| Paper Size | A3, A4, A5 |
| First Copy Out Time | Less than 10 seconds |
Safety guidelines to follow when performing maintenance or repairs.
Identification of critical components essential for user and equipment safety.
Comprehensive list of error codes with their classifications and troubleshooting steps.
List of service call error codes, their causes, and troubleshooting.
Procedures and descriptions for accessing various self-diagnostic test modes.
Procedure for adjusting the auto-toner sensor after developer replacement.
Adjusting image quality parameters like density, gamma, and sharpness for copying.
Adjusting image quality for printing, focusing on smudged/faint text and density.
Procedures for checking and adjusting high-voltage transformer outputs for various chargers.
Step-by-step troubleshooting guide for various error codes and paper jams.
Diagnosing and resolving image quality issues like density, fogging, and blotches.
Procedures for replacing the main board and SRAM board.
To Next Page
