Toshiba e-STUDIO 307 - Page 88

Chapter 6 INFORMATION ABOUT EQUIPMENT
86
Job Separator (MJ-5004N)
Model name MJ-5004N (For DP-2072/2572/3072)
Acceptable paper
size
Standard size
A3, A4, A4-R, A5-R, A6-R
*1
, B4, B5, B5-R, FOLIO, CHO-3 (120 mm x 235 mm)
*1
, YOU-4 (105
mm x 235 mm)
*1
, DL (110 mm x 220 mm)
*1
, LD, LG, LT, LT-R, ST-R, COMP, 13”LG, 8.5”SQ,
COM10 (4 1/8” x 9 1/2”)
*1
, Monarch (3 7/8” x 7 1/2”)
*1
, 8K, 16K, 16K-R
Non-Standard size Length: 100 - 297 mm (3.9 - 11.7”), Width: 148 - 432 mm (5.8 - 17”)
Acceptable paper
weight
Upper stacker 52 - 105 g/m
2
, 14 - 28 lb. Bond
Lower stacker 52 - 209 g/m
2
, 14 lb. Bond - 110 lb. Index
Loading capacity
Upper stacker 25 mm, 0.98” (150 sheets)
*2
Lower stacker 40 mm, 1.57” (250 sheets)
*2
Power source Supplied from the equipment
Dimensions 498 mm (19.6”) (W) x 415 mm (16.3”) (D) x 153 mm (6.0”) (H)
Weight Approx. 3.3 kg (7.3 lb.)
*1 The lower stacker is used for paper exiting.
*2 The value in the parentheses is the number of 80 g/m
2
or 20 lb. Bond sheets.
Job Separator (MJ-5006)
Model name MJ-5006 (For DP-3572/4572/5072)
Acceptable paper
size
Standard size
A3, A4, A4-R, A5-R
*1
, A6-R
*2
, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R
*1
, COMP, 13”LG,
8.5”SQ, 8K, 16K, 16K-R
*1
Non-Standard size Length: 100 - 297 mm (3.9 - 11.7”), Width: 148 - 432 mm (5.8 - 17”)
*1
Acceptable paper
weight
Upper stacker 52 - 105 g/m
2
, 14 - 28 lb. Bond
Lower stacker 52 - 209 g/m
2
, 14 lb. Bond - 110 lb. Index
Loading capacity
Upper stacker 25 mm, 0.98” (150 sheets)
*3
Lower stacker 40 mm, 1.57” (250 sheets)
*3
Power source Supplied from the equipment
Weight Approx. 1.5 kg (3.3 lb.)
*1 The upper stacker is used for paper exiting.
*2 The lower stacker is used for paper exiting.
*3 The value in the parentheses is the number of 80 g/m
2
or 20 lb. Bond sheets.
Oset Tray (MJ-5005)
Model name MJ-5005 (For DP-2072/2572/3072)
Acceptable paper
size
Standard size
A3
*1
, A4
*1
, A4-R
*1
, A5-R, A6-R, B4
*1
, B5
*1
, B5-R, FOLIO
*1
, CHO-3 (120 mm x 235 mm), YOU-4
(105 mm x 235 mm), DL (110 mm x 220 mm), LD
*1
, LG
*1
, LT
*1
, LT-R
*1
, ST-R, COMP, 13"LG,
8.5"SQ
*1
, COM10 (4 1/8” x 9 1/2”), Monarch (3 7/8” x 7 1/2”), 8K
*1
, 16K
*1
, 16K-R
Non-Standard size Length: 100 - 297 mm (3.9 - 11.7”), Width: 148 - 432 mm (5.8 - 17”)
Acceptable paper weight 52 - 209 g/m
2
, 14 lb. Bond - 110 lb. Index
*2
Loading capacity 39 mm (1.54”) (250 sheets)
*3
Shift amount Approx. 30 mm (1.2”)
Power source Supplied from the equipment
Dimensions 500 mm (19.7”) (W) x 415 mm (16.3”) (D) x 169 mm (6.7”) (H)
Weight Approx. 3.5 kg (7.7 lb.)
*1 Enables copied and printed sets to be collated or stacked in groups with each set being oset.
*2 The paper acceptable for B5 and B5-R is 52 - 163 g/m
2
, 14 lb. Bond - 90 lb. Index.
*3 The value in the parentheses is the number of 80 g/m
2
or 20 lb. Bond sheets.