Toshiba e-Studio 332s - Page 116

- 116 -
Printing from a Computer
5
Printing
10 Click [Add].
If the [You have no printers available] dialog
box is displayed, click [Add].
Note
● If the name of your machine whose [connection]
is [USB] is already displayed, select it and click
[Delete], and then click [Add].
11 Select the name of your machine whose
[Connection] is [USB], and then check
that [TOSHIBA e-STUDIO403S(PS)]
or [TOSHIBA e-STUDIO403S(PCL)] is
displayed in [Print Using].
12 Click [Add].
13 Check that the name of your machine
is displayed in [Printer List], and then
close the window.
14 Remove “Software DVD-ROM” from the
computer.
The installation is complete.
◆ Print a test page to check that the printer
driver is successfully installed on the
computer.
1 From the [Go] menu, select
[Applications] > [TextEdit].
2 Select the [File] menu > [Page setup].
3 Select the name of your machine from
[Format for].
4 Check that [TOSHIBA
e-STUDIO403S(PS)] or [TOSHIBA
e-STUDIO403S(PCL)] is displayed
correctly under [Format for].
5 Click [OK].
6 Select the [File] menu > [Print].
7 Select the name of your machine from
[Printer].
8 Click [Print].