- 41 -
Initial Setup for Faxing
3
Faxing (For e-STUDIO403S only)
a Press , , , to select the
character you want, and then
press
OK
.
- The selected character is entered as “*” in
the text eld.
- If you have entered an incorrect value,
press the <CLEAR> key and then enter
the correct value.
b Repeat step a until all characters
required are entered.
c Press the and to select [Enter]
and press
OK
.
4 Press the to select [User Install] and
press
OK
.
5 Press the to select [Reception Mode]
and press
OK
.
6 Press the to specify a reception mode
and press
OK
.
Settable Reception Mode:
Fax Ready Mode* Tel/Fax Ready Mode
Ans/Fax Ready Mode Tel Ready Mode DRD
*indicates the factory default.
7 Press the until the top screen is
displayed.
To Next Page
Loading...
