Toshiba e-STUDIO 507 - Interrupting copying and making other copies

1 TROUBLESHOOTING FOR THE HARDWARE
30 Clearing a Paper Misfeed
When the Hole Punch Unit MJ-6104 is installed
3
Open the cover holding the handle of the Bridge Unit.
When the Hole Punch Unit MJ-6104 is installed, proceed to step
5.
4
Remove the misfed paper.
Proceed to step 8.
5
Open the Hole Punch Unit cover.
6
Turn the green knob to get the misfed paper out.
7
Close the Hole Punch Unit cover.