2.HOW TO MAKE COPIES
36 Bypass Copying
5
Press [Paper Type] if the paper you placed on the bypass tray is other than plain paper.
6
Select the paper type and press [OK].
To print on the back side of the paper, press [Printed] under “Back Printed”.
To automatically make 2-sided copies, press [None] under “Back Printed” and make 2-sided copy settings.
P.64 “Making a 2-sided copy”
7
After setting the paper size and paper type, press [OK].
The menu returns to the Basic menu.
8
Select other copy modes as required, and then press the [START] button on the control panel.
To Next Page
Loading...
