3.User Functions
Admin 17
User Functions
Combination of Settings
Set the job control, referring to the table below that shows a typical combination of the settings.
Regardless of the job control settings, jobs are not skipped and they are left suspended in the following situations:
Consecutive copy printing is suspended.
The first proof copy printing is suspended.
Interrupt copy printing is suspended.
Purposes
Job Skip
Control
Auto
Delete
Timer
Job Skip
Immediately
Behavior
after
recovering
suspended
cause
Restart
only when
owner
logs in
Remarks
Keep the print
order.
Off - - - - The equipment does
not enter the energy
saver mode if the
suspended jobs are
left as they are. After
the suspension, the
jobs of other owners
are resumed.
Resume the
skipped jobs
automatically
after clearing the
causes of
suspension.
On Arbitrary
choice
Off Resume Arbitrary
choice
The skipped jobs
might not be
resumed depending
on the causes of
suspension.
Do not resume the
suspended jobs
automatically.
On Arbitrary
choice
On Skipped Arbitrary
choice
Received faxes could
be left skipped. Set
[Auto] for [Behavior
after recovering
suspended cause] to
avoid this situation.
Allow only the log-
in job owner to
restart the
suspended jobs.
On Arbitrary
choice
On Skipped On Received faxes could
be left skipped. Set
[Auto] for [Behavior
after recovering
suspended cause] to
avoid this situation.
Enter the energy
saver mode as
soon as possible
even if jobs are
left.
On Arbitrary
choice
On Arbitrary
choice
Arbitrary
choice
-
Delete the left
jobs after the
specific time.
On On
(Select the
time.)
On Arbitrary
choice
Arbitrary
choice
If [Job Skip
Immediately] is set to
[Off], the jobs left
suspended cannot be
deleted.
To Next Page
Loading...
