4.TopAccess
[Administration] Tab 25
TopAccess
Network Settings
P.25 “Setting up SMB”
P.29 “Setting up Bonjour”
P.30 “VNC Setting”
The [Network] submenu can be accessed from the [Setup] menu on the [Administration] tab.
See the TopAccess Guide for how to access it and the following page for information on the [Setup] menu:
P.24 “[Setup] Item List”
Setting up SMB
In SMB, you can specify the SMB network properties to access this equipment through a Microsoft Windows Network
and enable SMB printing. When you enable the SMB, users can also browse the local folder in the equipment. You can
also specify the WINS server when the WINS server is used to enable the Windows print sharing and Windows file
sharing services between the different subnets.
5 Auto Delete Timer Set the time to delete the skipped jobs. [No Limit] does not delete skipped
jobs.
Item name Description
1 SMB Server Protocol Select whether the SMB protocol is enabled or disabled.
Enable — Select this to enable SMB.
Disable — Select this to disable SMB.
2 SMB 1.0 Support For Server Select whether the SMB 1.0 server is enabled or disabled.
Enable — Select this to enable the SMB 1.0 server.
Disable — Select this to disable the SMB 1.0 server.
Item name Description
5
1
7
8
9
10
11
12
13
14
15
16
17
18
19
6
4
3
2
To Next Page
Loading...
