4.TopAccess
[Administration] Tab 31
TopAccess
Fax Settings
P.31 “Received Forward Setting for Application”
P.32 “Box Setting (Received Forward Setting for Application)”
The [Fax] submenu can be accessed from the [Setup] menu on the [Administration] tab.
See the TopAccess Guide for how to access it and the following page for information on the [Setup] menu:
P.24 “[Setup] Item List”
Received Forward Setting for Application
You can set whether or not to save received data (meta data) which can be used for the activation of the received
document (image file received by fax) and an application in its storage area. For details about the application, contact
your service technician or representative.
This cannot be used if an application which uses the received document is not installed in the equipment or the
execution permission of the application is disabled.
7 Open Range Select the disclosure range of the remote panel operation function.
Admin
— Permits the administrator.
User — Permits general users.
8 Intermediate Server Address Enter an IP address and port number of the relay server used for the remote
panel operation.
Item name Description
1 Enable Received Forward Select [Enable] to save the received document in the storage area of the
application. [Disable] is the default setting.
When [Enable] is selected for [Enable Received Forward], the Received
Forward to Applications setting is taken as the top priority even if other
forward settings are also enabled.
2 Backup Setting Select [Enable] to save the received document in the specified box as a
backup file. [Disable] is the default setting.
This will be displayed when [Enable] is selected for [Enable Received
Forward].
3 [Box Setting] button Click this to change the box for saving the received document or to modify the
folder name. When you click this button, the [Box Setting] screen will appear.
You can change the settings when [Enable] is selected for [Backup Setting].
Item name Description
To Next Page
Loading...
