4.TopAccess
34 [Administration] Tab
Common Setting
You can register MFPs all at once on this screen to set up them for collaboration.
Be sure to register this equipment as a collaborating MFP.
You do not need to click the [Save] button on the [Common Setting] screen.
Item name Description
1 [Cancel] button Cancel the settings.
2 [Add] button Registers an MFP for collaboration.
Enter the IP address or host name of the collaborating MFP in the input box
below and then click the [Add] button to register it. You can register up to 10
MFPs.
3 [Delete] button Deletes the MFP that you have selected in the list below.
4 Input box Enter the IP address or host name of an MFP that you want to register.
5 Server Address Shows the IP address of the registered MFP.
6 [TopAccess] button Starts TopAccess of the MFP concerned.
To Next Page
Loading...
