4.TopAccess
[Administration] Tab 37
TopAccess
3 Shared User Management Select whether this equipment should act as a primary or secondary MFP
when managing user information in sync with other MFPs.
Disable — Does not synchronize.
Enable(Primary) — Synchronizes as a primary MFP.
Enable(Secondary) — Synchronizes as a secondary MFP.
Select one MFP from among MFPs and select [Enable (Primary)] on it. Be sure
to select [Enable (Secondary)] on other MFPs. As a result, the user information
of the primary MFP can be shared on the secondary MFPs.
4 Connection Timeout Enter the timeout period before stopping communication if the primary MFP
cannot connect to the secondary MFPs. You can set 1 to 180 seconds.
5 Use Common Settings Uses information of the MFPs registered on the [Common Settings] screen to
update the following list automatically: you cannot change the list. The
[TopAccess] and [Sync] buttons are not available for your own MFP.
6 Use Separate Settings Uses information of the MFPs registered in the following list.
7 [Add] button Adds a new secondary MFP.
Enter the IP address or host name for the secondary MFP for the distribution
destination in the input box below, and then click the [Add] button to register.
You can register up to 10 MFPs.
8 [Delete] button Deletes the selected MFP from the list of secondary MFPs.
9 [Sync All] button Synchronizes all the secondary MFPs with the primary MFP to share the user
information.
10 Input box Enter the IP address or host name when registering a secondary MFP.
11 Server Address Shows the IP address of the added secondary MFP.
12 [TopAccess] button Starts TopAccess.
13 [Sync] button Synchronizes the secondary MFP with the primary MFP to share the user
information.
14 Last Update Displays the previous update time.
Item name Description
To Next Page
Loading...
