Toshiba E-STUDIO 5528A - Refilling With Staples

Refilling With Staples 79
TROUBLESHOOTING FOR THE HARDWARE
0.Refilling With Staples
Refill with staples according to the following procedures when the staples in the stapler of the finisher and saddle
stitch unit run out.
 Finisher
 Finisher / Saddle Stitch Finisher
1
Open the front cover of the finisher.
2
Remove the staple cartridge.
3
Take the empty staple case out of the staple cartridge.
Pull up the empty staple case while pushing both sides as shown in the figure.
4
Fit a new staple case on the staple cartridge.
Push the staple case hook into the staple cartridge socket until you hear a click.