EasyManua.ls Logo

Toshiba e-Studio 60F - Sms; Send SMS; Receiving an SMS

Toshiba e-Studio 60F
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
SMS
Your e-STUDIO60F lets you send SMS messages all
over the world. SMS (Short Message Service) was orig-
inally devised for mobile communication, but it is now
available in many countries via regular telephone lines.
Availability of the SMS service depends on the coun-
try and operator. Your e-STUDIO60F has been pre-set
to use the SMS service in your country . If it does not
work correctly, please contact your SMS service pro-
vider and change these settings (see Advanced set-
tings / SMS settings).
Send SMS
One recipient
1 Press W twice.
2 Type the message you want to send.
To type capital letters, hold down + and press the de-
sired key. To type special characters, hold down CTRL
and press the desired key (e. g. to enter a question
mark, hold down CTRL and press V). You can move
the cursor with / and delete characters with \.
3 Press W.
4 Enter the telephone number.
If you want to send an SMS to a phone abroad, you
should dial the number in its international form (e. g.
0049… for Germany).
5 Press W to send the message. The e-STUDIO60F
will print a transmission report.
This function can be deactivated (see Fax / Send re-
port).
Directory a
1 Press W twice.
2 Type your message and press W.
3 To select a number from the directory, press a
and use / to select an entry.
4 Press W to send your message.
Redial L
The last ten numbers dialled on the e-STUDIO60F will
be stored in the redial memory.
1 Press W twice and type your message.
2 Press W.
3 Press L as often as necessary, until the desired
number appears.
4 Press W to send your message.
Several recipients &
1 Press W twice and type your message.
2 Press W and enter the first telephone number.
3 Press & and enter another telephone number
(max. 10).
4 Press W to send your message.
Receiving an SMS
Received SMS messages will be printed automatical-
ly. (You can change this setting—see Advanced set-
tings / SMS settings.) If you switch off automatic print-
ing, messages will be stored in the memory. If SMS
messages are stored, the lamp next to the W key will
flash.
Reading an SMS
1 Press W and OK.
2 Use / to choose a message and press OK.
3 You can scroll up and down within the message with
/.
Printing an SMS
1 Press W and K.
2 Use / to choose a message and press OK.
Deleting an SMS
1 Press M, 43 and OK.
2 You can now choose which messages to delete us-
ing /:
SELECTED—press OK and choose the messages to
delete using /. Confirm with OK.
ALREADY READ—press OK to delete the messages
that you have already read.
ALL—press OK. All messages will be deleted.

Related product manuals