Loading Paper in Drawers 11
LOADING PAPER
0.Loading Paper in Drawers
Follow the procedure below to place paper in the drawer, Paper Feed Unit, Paper Feed Pedestal, or Additional Drawer
Module. For acceptable paper, refer to the Specifications Guide.
Be careful not to let your fingers be caught when pushing the drawer into this equipment.
This could injure you.
Be careful not to cut your fingers when fanning.
This could injure you.
Fan and jog the stack of paper well before you place it in a drawer, or the sheets may not be separated before being
fed.
Place paper with its copy side up. The copy side may be noted on its wrapping paper.
Never put anything in a vacant space in the drawer after the paper has been loaded. Otherwise, it may cause paper
misfeeds or an equipment malfunction.
Paper Feed Unit for this equipment
1
Pull out a drawer carefully until it comes to a stop.
2
Press the right side of the side guide lock to cancel the lock.
To Next Page
Loading...
