Toshiba E-Studio 657 - Regular Cleaning; Cleaning Scanning Area and Glass; Cleaning Guide and Platen Sheet

Chapter 3 MAINTENANCE
38
Stapler Unit of Saddle Stitch Finisher (MJ-1029)
1
Open the front cover of the Finisher.
2
Take o the staple cartridge.
3
Press the buttons on both sides of the cartridge
and take out the empty staple case.
4
Install a new staple case into the staple cartridge
and pull out the seal.
5
Install the staple cartridge onto the stapler.
6
Close the front cover of the Finisher.