Toshiba E-Studio 657 - Page 41

3
Replacing Staple Cartridge
39
1
Open the front cover of the Finisher, and then pull
out the saddle stitch unit.
2
Pull the handle of the stapler toward you, and
then turn it clockwise.
3
Take out two empty staple cartridges.
4
Install two new staple cartridges.
5
Pull the handle of the stapler toward you, and
then lower the stapler to its original position.
6
Insert the saddle stitch unit into the Finisher, and
then close the front cover of the Finisher.
Saddle Stitch Unit of Saddle Stitch Finisher
(MJ-1028/MJ-1029)