Toshiba e-studio 6570c Copying Guide

5.IMAGE ADJUSTMENT
Using Image Adjustment Functions 143
5 IMAGE ADJUSTMENT
 ADF Scan Noise Reduction
You can set the scan noise reduction level for scanning originals with the Reversing Automatic Document
Feeder at copying. Scan noise can be reduced if it is conspicuous on images due to fine dust.
1
Press [ADF NOISE REDUCTION] in the IMAGE menu.
2
Press [LOW], [MIDDLE], or [HIGH] to adjust the scan noise reduction level, and then
press [OK].
Fine lines other than scan noise may become faint if you set the scan noise reduction level higher.
Canceling the ADF scan noise reduction
Press [NONE] or [RESET], and then [OK].

Toshiba e-studio 6570c Specifications

General

Category	All in One Printer
Type	Color Multifunction Printer
Printing Technology	Laser
Print Speed (Black)	65 ppm
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Duplex Printing	Yes
Functions	Print, Copy, Scan
Scan Resolution	600 dpi
Original Size	11 x 17 inches
Automatic Document Feeder	Yes
Connectivity	Ethernet, USB
Network Connectivity	Ethernet