Toshiba e-STUDIO161 Service Manual

Toshiba e-STUDIO161

124 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

SERVICE MANUAL

08/7,)81&7,21$/',*,7$/6<67(06

e-STUDIO161

MR-2015

MY-1022

)LOH1R60(

577(&

9HUB

Table of Contents

Other manuals for Toshiba e-STUDIO161

Operator's Manual76 pages

Questions and Answers:

B
brian23Aug 13, 2025
Why is my Toshiba All in One Printer not working?
- T
  Teresa JohnsonAug 14, 2025
  If your Toshiba All in One Printer does not operate, several factors could be at play. First, ensure the machine is properly plugged into a grounded power outlet and that the power switch is turned on. If the POWER SAVE indicator is blinking, allow the machine to finish warming up. Check that the front or side cover is completely closed. If the machine is in auto power shut-off mode, press the [START] key to resume operation. If a paper feed location is blinking, change the paper size setting or use the [TRAY SELECT] key to change the tray selection. You may also try opening and closing the tray or pressing the [CLEAR] or [RESET] key.
T
Travis Trujillo MDAug 17, 2025
Why is my Toshiba All in One Printer not printing even though the online indicator is off?
- M
  Melissa WheelerAug 17, 2025
  If your Toshiba All in One Printer is not printing and the ON LINE indicator is not blinking, the machine may be in off-line mode. Press the [ON LINE] key to turn on the ON LINE indicator. Check the printer cable connections at both ends, ensuring they are secure, and try a known good cable. If a copy job is in progress, wait until it is complete. Verify that the port setting is correct. Also, ensure that the correct printer, "TOSHIBA e-STUDIO161 printer", is selected in the "Print" dialog box of your application. Finally, check if the printer driver has been installed properly.
B
bradley56Aug 25, 2025
How to adjust the brightness on my Toshiba All in One Printer?
- D
  davisronaldAug 26, 2025
  If your Toshiba All in One Printer is producing copies that are too dark or too light, try selecting AUTO with the [AUTO/TEXT/PHOTO] key. Alternatively, manually adjust the exposure using the [Light] and [Dark] keys. If the issue persists even with AUTO selected, adjust the automatic exposure level.
K
Kristen ConleyAug 29, 2025
What to do if my Toshiba All in One Printer is not printing and the online indicator is blinking?
- M
  Mark TurnerAug 29, 2025
  If your Toshiba All in One Printer is not printing and the ON LINE indicator is blinking, it could be due to mismatched tray size settings between the machine and the printer driver. Ensure that the same paper size is set in both locations. Also, make sure that the specified size of paper is loaded in the paper tray. If the PAPER SIZE indicator is blinking, you can manually select a tray using the [TRAY SELECT] key or load paper in the bypass tray and press the [ON LINE] key to begin printing.
S
Steven WuSep 1, 2025
Why is my Toshiba All in One Printer printing blank pages?
- J
  Jennifer JohnsonSep 1, 2025
  If your Toshiba All in One Printer is producing blank copies, ensure that the original document is placed correctly. For the ADF, the original should be face up, and for the document glass, it should be face down.
T
tbaileySep 5, 2025
How to fix cut off image on Toshiba All in One Printer?
- B
  benjaminjohnsonSep 5, 2025
  If parts of the image are cut off or there is too much blank space when using your Toshiba All in One Printer, first, ensure the original is placed correctly. Press the [AUTO IMAGE] key to automatically adjust the copy ratio to fit the original and paper size appropriately. If you've changed the paper size in the tray, remember to also update the tray's paper size setting accordingly.
B
bedwardsSep 8, 2025
Why does my Toshiba All in One Printer produce wrinkled copies?
- W
  William BeckSep 9, 2025
  Wrinkles appearing in the paper or the image disappearing in places on your Toshiba All in One Printer can be caused by using paper outside the specified size and weight range; use only copy paper within the recommended specifications. Also, avoid using curled or damp paper; replace it with dry copy paper. When the machine is not in use for extended periods, remove the paper from the tray and store it in a dark, moisture-free bag.

Toshiba e-STUDIO161 Specifications

General

Print Speed	16 ppm
Print Resolution	600 x 600 dpi
Copy Speed	16 cpm
Copy Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Maximum Copy Size	A3
Zoom	Yes
Paper Size	A4, A5, B5
Paper Weight	60 to 90 g/m²
Zoom Range	25% to 400% in 1% increments
Multiple Copy	Up to 99 copies
Dimensions (W x D x H)	600 x 610 x 545 mm
Copying process	Laser Electrostatic

Related product manuals

Preview: Toshiba e-studio120

Toshiba e-studio120

Preview: Toshiba e-studio650

Toshiba e-studio650

Toshiba e-studio 120

Toshiba e-STUDIO 203S

Toshiba e-STUDIO 4518A

Toshiba e-STUDIO 3518A

Toshiba e-STUDIO 3018A

Toshiba e-STUDIO 3015AC

Toshiba e-STUDIO 4515AC

Toshiba e-STUDIO 2515AC

Toshiba e-STUDIO 3515AC

Preview: Toshiba e-STUDIO 2010AC

Toshiba e-STUDIO 2010AC