2
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO181/211
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 17
2.2.7 Adjustment mode (05)
Classification List of Adjustment Mode (05)
Items in the adjustment mode list in the following pages can be corrected or changed in the
adjustment mode (05). Turn ON the power with pressing the digital keys [0] and [5] simultaneously
in order to enter this mode.
Classification Adjustment Mode (05)
ADF
[Aligning amount] 354
[Transporting] 357,358,365
Image
[Printer density] 667-0 to 4,672-0 to 4
[Image density] 501,503,504,505,506,507,508,509,510,512,514,515,532,533,534,845,
846,847,850,851,852,855,856,857,860,861,862
[Gamma table] 609
[Gamma slope] 593,594,595
[Background
adjustment]
600,601,602,869,870,871
[Sharpness] 620,621,622,623,865-0 to 2,866-0 to 2,867-0 to 2
[Smudged/Faint text] 648,654,655,664,665
[Margin] 430,431,432,433,435,436,437,438
[Range correction] 535,536,537,570,571,572,693,694,695,820,821,822,825,826,827,830,
831,832,835,836,837
Paper feeding
[Paper pushing
amount]
466-0 to 7
[Aligning amount] 450-0 to 2,451-0 to 2,458-0 to 2,460-0 to 2,461-0 to 2,462-0 to 3,
463-0 to 2,464-0 to 2
Drive
[Exit motor] 424
[Main motor] 421
Development
[Auto-toner] 200,201
[Developer bias] 205
[Temperature] 270
[Relative humidity] 247
[Drum temperature] 248
Scanner
[LED] 311,312,313
[Position] 305,306
[Carriage position] 359
[Shading position] 350,351
[Reproduction ratio] 340
[Peak] 310
Charger [Main charger bias] 210
Transfer [Transfer bias] 220,221,222
Separation [Separation bias] 233,234,235
Process [Toner recycle] 280
Laser
[Write starting] 410,411,440,441,442
[Polygonal motor] 401,405
[Laser power] 286
[Sideways deviation] 497-0 to 5
To Next Page
Loading...
