Setting Up the UNIX Filters 179
4
Enter the following command:
rmquedev -q <queue name> -d dev_<queue name>
5
Enter the following command:
rmque -q <queue name>
Deleting a print queue manually on Linux
1
Log on to the root account.
2
Enter the following command:
rm /opt/toshiba/tap/interface/<queue name>
3
Enter the following command:
rm /opt/toshiba/tap/interface/<queue name>.conf
4
Enter the following command:
/opt/toshiba/tap/bin/modPrintcap -d <queue name>
5
Enter the following command:
ls /opt/toshiba/tap/bin/flag_<queue name>
6
If the above file exists, enter the following command:
/opt/toshiba/tap/bin/printconf_import \
-d <queue name> \
rm /opt/toshiba/tap/bin/flag_<queue name>
7
Restart your lpd.
Deleting a print queue manually on OpenUNIX
1
Log on to the root account.
2
Enter the following command:
lpadmin -x <queue name>
3
Enter the following command:
rm /etc/lp/interfaces/<queue name>.conf
To Next Page
Loading...
