6.User Functions
Admin 47
User Functions
3
Enter the file name, set the password, and then save the file.
1. Enter the file name to [File Name].
Enter a file name of up to 128 alphanumeric characters.
2. Enter a password to [Password].
3. Enter the password again to [Retype Password].
4. Press [Save].
Creating of the clone files begins.
Do not remove the USB storage device until the data transfer is complete. Removing the device while data are
being transferred could destroy them or cause a malfunction of the equipment.
4
When the creating of the clone files is complete, press [OK].
You will be returned to the Cloning screen.
ICC Profile ICC Profiles installed from TopAccess
You can select ICC profiles only for color devices.
You are required to have the license to use some ICC profiles.
Print Data Converter Print Data Converter Settings
Built-in Administrator’s password Password of Built-in Administrator
Fonts Downloaded fonts for print and display
You are required to have the license to use some fonts.
Data category Data to be duplicated
To Next Page
Loading...
